High Power Industry Portable Air Cooled Chiller / For ,
Electroplate , Roll
The Water Chiller is to provide a cooling process for better
industrial production. In plastic molding industry, it improves
quality of molded products and shorten period of injection molding
cycles. Hence maximizes productivity of plastic molding
And water could be used in various of different industries, just
depends on the needs.
1. The water chiller is to provide cooling process to plastic
moulds to improve molded products quality and cut down injection
cycle time. Hence maximizes plastic molding machines productivity.
2. Installed with import compressors, highly efficient shell
condenser and evaporator, excellent cooling, quiet and low
3. Microprocessor control, easy to operate;
4. Unique open reservoir tank made of stainless steel, easy
cleaning and maintenance;
5. Pipeline well-arranged to save energy;
6. Installed will precise electronic thermostat accurately
maintains temperature within 30C~500C;
7. Installed with current overload protector, high and low pressure
switch, electronic timer delay, fault display system;
8. Screen liquid crystal display of chill water out let and inlet
with temperatures setting;
9. Single, double or four compressors combination unit available;
10. Industrially designed, elegant and ergonomic.
Water Tank Plate Tube, High Efficiency Shell-And-Tube, Stainless
High Effective Red Copper Pipes Covered Into Aluminum Fins +Outer
Low Noise Fan
Amount Of Cooling Air
Chilled Water Pump
Water Tank Volume
Incomplete/Reverse Phase Warning, High & Low Voltage
Protection, Overload Current Protection, Water Shortage Warning,
Anti-Freezing Protection, Delay Protection
R22 R407C R410C R404A R134A
1 .Imported Copeland and Performer compressor
2. High effective
3. Safe operation
4. easy control board
5. High performance
KASSEL air-cooled chillers compact structure, the appearance of
sophisticated, easy to install. Without cooling towers and pumps
and other ancillary equipment, especially suitable for poor water
quality or water shortage areas. The unit has 100% performance test
before leaving the factory to ensure the reliability of the unit
and fulfill its commitment to users - to ensure that relevant
performance parameters such as cooling capacity and input power
meet the relevant standards, samples and contract requirements.
Air-cooled chiller filling the refrigerant and lubricants at the
factory, as long as customers can import and export of plumbing and
power can be put into use.
Air-cooled chiller configuration features
First, the compressor
Using internationally renowned brands Japan Daikin, Japan Sanyo,
the United States Copeland and other fully enclosed scroll
compressor, supporting the production of high-quality
high-performance brass condenser, evaporator and world-renowned
brand components, the unit has a small size, low noise , Energy,
long life, easy operation, etc., its beautiful and exquisite design
and reliable and stable high-performance high quality products in
the same class outstanding!
Second, the evaporator
Evaporator brass with internal and external thread enhancement
tube. The surface of the copper pipe is threaded, the outer surface
of the copper pipe is smooth, and the cooling effect is good. The
evaporator barrel body is insulated with a 25 mm thick PE
insulation board, with no condensation and less cooling loss.
Third, the condenser
Condenser imported from abroad, the original brass, processed into
low-profile trapezoidal tube, enhanced heat transfer capability,
smooth copper surface, so that water pressure is reduced, easy to
clean and maintain.
Fourth, the protection device
Protection system devices are: compressor delay start protector,
overload protector, high and low voltage protector, temperature
control switch, antifreeze switch, fuse, electronic time protection
safety valve, compressor overheat protection, compressor frequent
start protector And abnormal light, to ensure the normal operation
of the unit.
Five, control system
The company developed a highly intelligent PLC, PC-class computer
control system that can do remote monitoring and control, with
automatic loading and unloading, timer switch machine and record
the cause of failure and other multiple functions; simple
operation, the host and the power connection. Low failure rate,
high safety factor, easy installation, system control can be
adjusted instantly, intuitive and reliable.
Six, frozen parts
Frozen parts selection of the world's top brand SPORLAN (US Spola),
ALCO (American Eco), DANFOSS (Denmark Danfoss), etc., performance,
safety and environmental protection.
Seven, brand-name fans
Optional imported European CIE fan, or domestic famous brand
FULIHUA fan, Mal fans and so on. International advanced rotor
design, imports of aluminum-magnesium alloy and Japan imported iron
Pooh fan, long life, low noise, high efficiency, anti-rain and
snow, high temperature, more than a decade of efficacy does not
diminish, greatly improving the thermal efficiency ratio.